SE-GR3E-95ZR, GT350 - 95MM Premium Throttle Body
SE-GR3E-95ZR, GT350 - 95MM Premium Throttle Body
Premium Modified, Ported, and Calibrated Throttle Body.
GT350: 2015-Present.
Also Fits: Mustang GT’s (2015-2017): Must be paired with GT350 intake manifold.
ALL STOCK GT350 INTAKE MANIFOLDS WILL REQUIRE AN ADAPTER. - P/N: SE-FMCO-95-87GT350
Does not require an adapter if GT350 intake manifold is ported to at least 93mm at the inlet (gasket will be provided).
Note: If GT350 intake manifold is ported to less than 93mm an adapter will be required. If the size is provided we can match it.
Additional Fitment Information: An Aftermarket Cold Air Intake (CAI) or duct/coupler of approximately 4inch Dia. is recommended as the clamping surface is much larger at the TB inlet. It will not fit the stock duct on GT or GT350 (OEM CAI).
NEW option: A brand new reworked part (0 miles / BNIB). The classic ported throttle body, 1350 SCFM @ 20” H2O at WOT.
FEATURES:
• Optimized Active Contours with sonic flow nozzles.
• Porting Taper and Upstream Bore with Velocity Stack.
• Greater Discharge Coefficient of Plate/Blade interface.
• 16 Ra Microinch, Diamond Polished Surface Finish.
• Self-Cleaning Throat/Flow Gap.
• Dimpled shaft trailing edge.
BENEFITS:
• Lower weight to power ratio at part throttle, for a more nimble/spirited driving experience.
• Linearization and smoothing of the curve for a more predictable response and crisper shifts.
• Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble).
• More air/power at every single throttle position after idle. Crucial for starting or expanding power gain modifications.